Spray Counter Setup

The spray counters maintain a running count of spray gun triggers (sprays).

Two spray counters are available:

Total Spray CounterCounts all sprays, both good and bad. The Total Spray Counter is based on the timer signal.  When enabled, it appears on the details window and faceplate. If disabled, it still appears on the details window.

Bad Spray CounterIncrements each time the gun sprays while an alarm condition exists.  It is based on alarm occurrences.  Appears only on the details window, only when enabled.

NOTE: If your system uses the new Spray Monitor module, part 1065268, the total spray and bad spray counters are automatically saved in the Spray Monitor non-volatile memory. If power to the Spray Monitor is turned off, the counter data is saved. If your system uses the old-style Spray Monitor modules, part 1042409, the spray counters are automatically reset to zero when the spray monitor is turned off.

1. Touch the information and setup bar on the appropriate Spray Monitor faceplate.

2. Select Spray Monitor Configuration from the drop-down menu.

3. Touch the Information button at the top of the Spray Monitor Configuration window.

   

4. Use the following buttons below the spray counter icons to change the settings of the spray counters:

Toggles the spray counter On or Off.
 

Resets the spray counter to zero. The reset is recorded in the counter reset history.
 

Opens the Spray Counter Reset History window, listing the spray count at reset, date and time of reset, and who reset the counter. The spray counter reset history can be printed.

NOTE: You can also set a spray counter warning. The warning appears when the total spray count reaches the warning setting.