During iTrax software installation, shortcuts for the OPC Server and iTrax OI are created on the Windows desktop. Double-clicking on the OI icon starts the OPC server first, then the OI.
NOTE: To run the OI, the OPC Server MUST be running. If you shut down the OPC server while the OI is running, you must shut down the OI, then restart it to start the OPC server and OI.
After you start the OI, you must log in if the security system is enabled.
On a Spray Monitor faceplate, double-clicking on an actual value (left column) in the pressure window opens a Large Read Out window. These windows can be used by the operator to monitor base, fire, or ΔP from a distance.
If a fault occurs during production, the OI displays a fault message and records the fault. Faults can be viewed and cleared through the OI.
NOTE: Faults and relays must be enabled in order for a fault message to appear in the OI.