Resetting Spray Counters

The spray counters maintain a running count of gun triggers (sprays). The spray counters can be reset manually from the OI. Older Spray Monitors would automatically reset the counters when they were turned off, new Spray Monitors retain the counters in memory when they are turned off. You can also turn on or off the spray counters.

Total Spray Counter: Counts all sprays, both good and bad. The Total Spray Counter is based on the timer signal. When enabled, it appears on the Details window and faceplate. If disabled, it still appears on the Details window.

Bad Spray Counter: Increments each time the gun sprays while an alarm condition exists. It is based on alarm occurrences and appears on the Details window only when enabled.

The spray counters may be reset for one Spray Monitor at a time or for several Spray Monitors at once:

Touch the information and setup bar at the bottom of the appropriate spray monitor faceplate.
Select Spray Monitor Configuration from the drop-down menu.
Touch this button at the top of the Spray Monitor Configuration window.

Touch this button for the spray counter you want to reset. A keypad appears, displaying two fields. The top field displays the current spray count. The second field is the reset field.

Enter zero or the number you want to reset the count to.
Touch this button to reset the spray count. The spray counter displays the value you entered and the reset is recorded in the counter reset history.

NOTE: If you do not have permission to access the Nordson service screens you cannot use the Configuration window to reset the Bad Spray Count for a single spray monitor. Use the Reset Multiple Gun Bad Spray Counters function on the System Configuration drop-down menu instead.

Touch this button on the main button bar.
Select the appropriate counter to reset from the drop-down menu:

Reset Multiple Gun Spray Counters: Resets the Total Spray Counters.

Reset Multiple Gun Bad Spray Counters: Resets the Bad Spray Counters.

The Reset Multiple Gun Spray Counters window appears. Select the one or more spray monitors.
Touch this button to reset the selected counters.