atsfirmware151.zip

Adhesive Tracking System
Firmware: Beta Release 1.51
To upgrade the ATS control box firmware:
1. Extract the two upgrade files from the zip file and copy them to the root directory of a USB drive.
2. Insert the USB drive into the USB port on the ATS control box. The display shows the USB Inserted screen.
The system recognizes the upgrade file and automatically begins upgrading the software. The display shows the upgrade progress.
When the upgrade successfully completes, the display shows the Upgrade Completed screen, reboots the system, and then shows the System Mode screen.
NOTE: After each firmware upgrade, the upgrade files on the USB root drive automatically move to the backup folder. To upgrade the firmware on another ATS control box, the upgrade files must be moved back to the USB root drive or they will not be recognized.



ATS0004.ZIP

Adhesive Tracking System
Website Software Release 0.004
This series of web pages monitors and controls Nordson melters equipped with the Adhesive Tracking System.
1. Right Click on link and select 'Save Target As'
2. Select the download destination on your PC, and then click Save to begin the download process.
3. Refer to the Product Manual for information on installing the Adhesive Tracking System Software.


ATSlogreader22.xlsm

Adhesive Tracking System
Log Reader Version 2.2
This tool enables users to read ATS history files in a more user-friendly display with interactive charts.
1. Click on link
2. Select the download destination on your PC, and then click OK to begin the download process.
3. Refer to the User's Guide for information about installing and using ATS software.