Touch the information and setup bar on the appropriate Spray Monitor faceplate.
Select Spray Monitor Configuration from the drop-down menu.
Touch the Faults button at the top of the Spray Monitor Configuration window.
You can turn on or off (enable or disable) fault warnings and alarms as needed. When warning and alarm faults are enabled for a Spray Monitor, warning and alarm icons appear in the fault bar on the Spray Monitor faceplate.
CAUTION: If faults are disabled, the OI will provide no indication of a warning or alarm condition if one occurs.
Touch the information and setup bar on the appropriate Spray Monitor faceplate.
Select Spray Monitor Configuration from the drop-down menu.
Touch the Faults button at the top of the Spray Monitor Configuration window.
Touch the On/Off buttons to change enable and disable the warnings and alarms as desired.
|
|
|
|
|
|
|
Alarms |
|
|
|
Warnings |
