Setting Pressure Control Fault Bands

NOTE: Only Nordson service personnel can access this setting. Contact your Nordson representative if you need to change this setting.

If you have enabled the Pressure Control function, you can set a pressure fault band ranging from 0 to 50 PSI above or below the base pressure setting. An alarm will be generated if the pressure goes out of range.

Default Setting

  1. Icon_TOOLSGREEN.JPG Touch the information and setup bar on the appropriate PRx Module faceplate.

  2. Icon_PRx_name.jpg Select PRx Configuration from the drop-down menu.

  3. Icon_SERVICE.JPG Select the Service button at the top of the PRx Configuration window.

  4. Scroll down to display the fault band settings on the PRx Configuration window.

  1. Drag the slider or touch the – and + buttons to increase or decrease the low and high pressure fault limits.

Related Topics