Warning: High Spray Flow

Spray pressure dropped below the high flow warning setting.

Possible Cause

Resolution

Spray gun nozzle worn, loose, or wrong size

Remove and clean the nozzle. If the nozzle is worn, replace it. Install the nozzle and recalibrate the spray gun.

CO-plate clogged or wrong size

Remove the CO-plate and clean it. Replace the CO-plate and recalibrate the spray gun if necessary.

Regulated system pressure too high

Reset the system pressure to the calibrated pressure and recalibrate the spray gun. Make sure the product quality is acceptable at the new pressure.

Air in fluid system

Purge air from the fluid system.

Spray gun defective

Disassemble and clean the spray gun. Replace parts as necessary and recalibrate the spray gun.