Alarm: High Spray Flow

Spray pressure dropped below the high flow alarm setting.

Possible Cause

Resolution

Spray gun nozzle worn, loose, or wrong size

Remove and clean the nozzle. If the nozzle is worn, replace it. Install the nozzle and recalibrate the spray gun.

CO-plate clogged

Remove the CO-plate and clean it. Replace the CO-plate and recalibrate the spray gun if necessary.

Blocked fluid supply to spray gun

Clean or replace the fluid filter screens. Flush the heater and fluid lines.

Pump output too low

Increase the pump output. Check the fluid supply to the pump.

Spray gun defective

Disassemble and clean the spray gun. Replace parts as necessary and recalibrate the spray gun.