HD Powder Flow Settings

Powder FlowPowder Flow is controlled by a timing sequence that is stored in a software look-up table. The cycle rate of the pump coupled with the suction duration, controls the number of pulses as well as the size of each pulse of powder. Each setpoint from 1−100 has its own recipe for pump operation. As you change the powder flow set point, these parameters change to increase or decrease the mass powder flow. Unlike the venturi technology, the powder mass flow is not affected by the Air (Pattern AirClosed Changes the delivery velocity as the powder exits the gun as well as changes the atomization and shape of the powder cloud.) Flow Air setting. The pattern air will change the delivery velocity as the powder exits the gun as well as change the atomization of the powder cloud.

  • Powder Flow output from 0−100%

  • Air (Pattern Air) Flow Air air from 0.20−4.00 cfm in 0.05 increments